# UDP Health Checks Type of document: How-to guide Product: NGINX Plus > This chapter describes how to configure different types of health checks for UDP servers in a load‑balanced upstream server group. --- NGINX Plus can continually test your upstream servers that handle UDP network traffic (DNS, RADIUS, syslog), avoid the servers that have failed, and gracefully add the recovered servers into the load‑balanced group. ## Prerequisites {#prereq} - You have [configured an upstream group of servers](nginx/admin-guide/load-balancer/tcp-udp-load-balancer.md) that handles UDP network traffic in the [`stream {}`](https://nginx.org/en/docs/stream/ngx_stream_core_module.html#stream) context, for example: ```nginx stream { #... upstream dns_upstream { server 192.168.136.130:53; server 192.168.136.131:53; server 192.168.136.132:53; } #... } ``` - You have configured a server that passes UDP datagrams to the upstream server group: ```nginx stream { #... server { listen 53 udp; proxy_pass dns_upstream; proxy_timeout 1s; proxy_responses 1; error_log logs/dns.log; } #... } ``` See [TCP and UDP Load Balancing](nginx/admin-guide/load-balancer/tcp-udp-load-balancer.md) for details. ## Passive UDP health checks {#hc_passive} NGINX Open Source or F5 NGINX Plus can mark the server as unavailable and stop sending UDP datagrams to it for some time if the server replies with an error or times out. The number of consecutive failed connection attempts within a certain time period is set with the [`max_fails`](https://nginx.org/en/docs/stream/ngx_stream_upstream_module.html#max_fails) parameter for an [`upstream server`](https://nginx.org/en/docs/stream/ngx_stream_upstream_module.html#server) (default value is `1`). The time period is set with the [`fail_timeout`](https://nginx.org/en/docs/stream/ngx_stream_upstream_module.html#fail_timeout) parameter (default value is `10` seconds). The parameter also sets the amount of time that NGINX considers the server unavailable after marking it so. So if a connection attempt times out or fails at least once in a 10‑second period, NGINX marks the server as unavailable for 10 seconds. The example shows how to set these parameters to 2 failures within 60 seconds: ```nginx upstream dns_upstream { server 192.168.136.130:53 fail_timeout=60s; server 192.168.136.131:53 fail_timeout=60s; } ``` ## Active UDP health checks {#hc_active} Active Health Checks allow testing a wider range of failure types and are available only for NGINX Plus. For example, instead of waiting for an actual TCP request from a DNS client to fail before marking the DNS server as down (as in passive health checks), NGINX Plus will send special health check requests to each upstream server and check for a response that satisfies certain conditions. If a connection to the server cannot be established, the health check fails, and the server is considered unhealthy. NGINX Plus does not proxy client connections to unhealthy servers. If more than one health check is defined, the failure of any check is enough to consider the corresponding upstream server unhealthy. To enable active health checks: 1. In the upstream group, specify a _shared memory zone_ with the [`zone`](https://nginx.org/en/docs/stream/ngx_stream_upstream_module.html#zone) directive – a special area where the NGINX Plus worker processes share state information about counters and connections. In the `zone` directive, specify the zone _name_ (`dns_zone` in the example) and the zone _size_ (`64k` in the example): ```nginx stream { #... upstream dns_upstream { zone dns_zone 64k; server 192.168.136.130:53; server 192.168.136.131:53; server 192.168.136.132:53; } #... } ``` 2. In the `server` block that forwards traffic to the upstream group (via [`proxy_pass`](https://nginx.org/en/docs/stream/ngx_stream_proxy_module.html#proxy_pass)), specify the [`udp`](https://nginx.org/en/docs/stream/ngx_stream_upstream_hc_module.html#health_check_udp) parameter to the `health_check` directive: ```nginx stream { #... server { listen 53 udp; proxy_pass dns_upstream; health_check udp; } #... } ``` A basic UDP health check assumes that NGINX Plus sends the “nginx health check” string to an upstream server and expects the absence of ICMP “Destination Unreachable” message in response. You can configure your own health check tests in the `match {}` block. See [The “match {}” Configuration Block](#hc_active_match) for details. ### Fine-Tuning UDP Health Checks {#hc_active_finetune} You can fine‑tune the health check by specifying the following parameters to the [`health_check`](https://nginx.org/en/docs/stream/ngx_stream_upstream_hc_module.html#health_check) directive: - `interval`– How often (in seconds) NGINX Plus sends health check requests (default is `5` seconds) - `passes`– Number of consecutive health checks the server must respond to to be considered healthy (default is `1`) - `fails`– Number of consecutive health checks the server must fail to respond to to be considered unhealthy (default is `1`) ```nginx server { listen 53 udp; proxy_pass dns_upstream; health_check interval=20 passes=2 fails=2 udp; } ``` In the example, the time between UDP health checks is increased to 20 seconds, the server is considered unhealthy after 2 consecutive failed health checks, and the server needs to pass 2 consecutive checks to be considered healthy again. ### The “match {}” configuration block {#hc_active_match} A basic UDP health check assumes that NGINX Plus sends the “nginx health check” string to an upstream server and expects the absence of ICMP “Destination Unreachable” message in response. You can configure your own health check tests that will verify server responses. These tests are defined within the [`match {}`](https://nginx.org/en/docs/stream/ngx_stream_upstream_hc_module.html#match) configuration block. 1. In the top‑level `stream {}` context, specify the [`match {}`](https://nginx.org/en/docs/stream/ngx_stream_upstream_hc_module.html#match) block and set its name, for example, `udp_test`: ```nginx stream { #... match udp_test { #... } } ``` 2. Refer to the block from the `health_check` directive by including the [`match`](https://nginx.org/en/docs/stream/ngx_stream_upstream_hc_module.html#health_check_match) parameter to specify the name of the `match {}` block: ```nginx stream { #... server { listen 53 udp; proxy_pass dns_upstream; health_check match=udp_test udp; } #... } ``` 3. In the `match {}` block, specify conditions or tests under which a health check succeeds. This is done with `send` and `expect` parameters: - [`send`](https://nginx.org/en/docs/stream/ngx_stream_upstream_hc_module.html#match_send)– The text string or hexadecimal literals (“/x” followed by two hex digits) to send to the server - [`expect`](https://nginx.org/en/docs/stream/ngx_stream_upstream_hc_module.html#match_expect)– Literal string or regular expression that the data returned by the server needs to match These parameters can be used in different combinations, but no more than one `send` and one `expect` parameter can be specified at a time. ## Usage scenarios ### NTP health checks {#example_ntp} To fine‑tune health checks for NTP, you should specify both `send` and `expect` parameters with the following text strings: ```nginx match ntp { send \xe3\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00; expect ~* \x24; } ``` #### Complete NTP health check configuration example ```nginx stream { upstream ntp_upstream { zone ntp_zone 64k; server 192.168.136.130:53; server 192.168.136.131:53; server 192.168.136.132:53; } server { listen 53 udp; proxy_pass ntp_upstream; health_check match=ntp udp; proxy_timeout 1s; proxy_responses 1; error_log logs/ntp.log; } match ntp { send \xe3\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00; expect ~* \x24; } } ``` ### DNS health checks {#example_dns} [DNS health checks](#hc_active) can be enhanced to perform real DNS lookup queries. You can craft a valid DNS query packet, send it to the upstream server, and inspect the response to determine health. The process includes three steps: - [Creating a CNAME test record](#create-a-cname-record) on your DNS server. - [Crafting a raw DNS query packet](#construct-a-raw-dns-query-packet) to be sent by NGINX Plus. - [Validating the expected response](#configure-the-match-block-for-dns-lookup) using the `match` block, where the `send` parameter represents a raw DNS query packet, and `expect` represents the value of the CNAME record. #### Create a CNAME record First, create a CNAME record on your DNS server for a health check that points to the target website. For example, if you are using BIND self-hosted DNS solution on a Linux server: - Open the zone file in a text editor: ```shell sudo nano /etc/bind/zones/db.example.com ``` - Add a CNAME record, making `healthcheck.example.com` resolve to `healthy.svcs.example.com`: ```none healthcheck IN CNAME healthy.svcs.example.com. ``` - Save the file and reload the DNS service: ```shell sudo systemctl reload bind9 ``` Once the CNAME record is live and resolvable, you can craft a DNS query packet that represents a DNS lookup and can be used in the `send` directive. #### Construct a raw DNS query packet The `send` parameter of the `match` block allows you to send raw UDP packets for health checks. To query your CNAME record, you need to construct a valid DNS query packet according to the [DNS protocol message format](https://datatracker.ietf.org/doc/html/rfc1035#section-4.1), including a header and question section. The DNS Query packet can be created using DNS packet builders, such as Python Scapy or dnslib, or packet analyzers, such as tcpdump or Wireshark. If using a packet analyzer, extract only the DNS layer, removing Ethernet, IP, and UDP-related headers. This is the raw DNS query of `healthcheck.example.com`, represented as one line in Hex with `\x` prefixes: ```none \x00\x01\x01\x00\x00\x01\x00\x00\x00\x00\x00\x00\x0b\x68\x65\x61\x6c\x74\x68\x63\x68\x65\x63\x6b\x07\x65\x78\x61\x6d\x70\x6c\x65\x03\x63\x6f\x6d\x00\x00\x01\x00\x01 ``` where: | HEX | Description | |------------------|------------------------| | \x00\x01 | Transaction ID: 0x0001 | | \x01\x00 | Flags: Standard query, recursion desired | | \x00\x01 | Questions: 1 | | \x00\x00 | Answer RRs: 0 | | \x00\x00 | Authority RRs: 0 | | \x00\x00 | Additional RRs: 0 | | \x0b\x68\x65\x61\x6c\x74\x68\x63\x68\x65\x63\x6b | "healthcheck" | | \x07\x65\x78\x61\x6d\x70\x6c\x65 | "example" | | \x03\x63\x6f\x6d | "com" | | \x00 | end of name | | \x00\x01 | Type: A | | \x00\x01 | Class: IN | #### Configure the match block for DNS lookup Finally, specify the `match` block in the NGINX configuration file to pair the raw query with an expected response. The `send` directive should contain the DNS query packet, while `expect` directive should contain a matching DNS record in the DNS server's response: ```nginx match dns { send \x00\x01\x01\x00\x00\x01\x00\x00\x00\x00\x00\x00\x0b\x68\x65\x61\x6c\x74\x68\x63\x68\x65\x63\x6b\x07\x65\x78\x61\x6d\x70\x6c\x65\x03\x63\x6f\x6d\x00\x00\x01\x00\x01; expect ~* "healthy.svcs.example.com"; } ``` #### Complete DNS health check configuration example ```nginx stream { upstream dns_upstream { zone dns_zone 64k; server 192.168.136.130:53; server 192.168.136.131:53; server 192.168.136.132:53; } server { listen 53 udp; proxy_pass dns_upstream; health_check match=dns udp; proxy_timeout 1s; proxy_responses 1; error_log logs/dns.log; } match dns { # make sure appropriate CNAME record exists send \x00\x01\x01\x00\x00\x01\x00\x00\x00\x00\x00\x00\x0b\x68\x65\x61\x6c\x74\x68\x63\x68\x65\x63\x6b\x07\x65\x78\x61\x6d\x70\x6c\x65\x03\x63\x6f\x6d\x00\x00\x01\x00\x01; expect ~* "healthy.svcs.example.com"; } } ``` ## See also - [Load Balancing DNS Traffic with NGINX and NGINX Plus](https://www.f5.com/company/blog/nginx/load-balancing-dns-traffic-nginx-plus) - [TCP/UDP Load Balancing with NGINX: Overview, Tips, and Tricks](https://blog.nginx.org/blog/tcp-load-balancing-udp-load-balancing-nginx-tips-tricks#activeHealthCheck)